Correctly adjusting ski bindings is an important operation for the safety of the skier.
Ski bindings are designed to release in the event of a fall, preventing the skier from becoming trapped.
If the bindings are incorrectly adjusted, they may not release, increasing the risk of injury.
In this article, we will provide you with a complete guide and useful tips for adjusting your ski bindings yourself or turning to a professional.
How do ski bindings work?
Ski bindings are made up of two parts: the heel and the toe.
The heel hooks into the bottom of the boot, while the toe hooks into the top of the boot.
In the event of a fall, the bindings open to release the boot from the ski, preventing the skier from being trapped.
How to choose the correct DIN value
The DIN value is an adjustment system for ski bindings that indicates the force needed to release the boot from the ski in the event of a fall. The DIN value is expressed in numbers from 1 to 16, with a higher value indicating a greater release force.
The correct DIN value for a skier depends on a number of factors, including:
How to adjust ski bindings
Adjusting ski bindings can be done by a professional at a sporting goods store.
However, you can also adjust them yourself, using a screwdriver or a special tool.
To adjust the bindings, you need to follow these steps:
- Remove the boot from the ski.
- Locate the binding adjustment screw.
- Use a screwdriver or special tool to turn the screw.
- Turn the screw clockwise to increase the binding adjustment and anti-clockwise to decrease it.
- Test the boot again to verify that the adjustment is correct.
Tips for correct adjustment of ski bindings
Here are some tips for correctly adjusting ski bindings:
- Use a screwdriver or special tool to avoid damaging the attachments.
- Turn the adjustment screw only one turn at a time.
- Check the adjustment of the bindings every time you wear the boots.
PM Sci rental in Folgarida: your safety guarantee
PM Sci rental in Folgarida is a shop specializing in the rental of ski and snowboard equipment. The rental staff is highly qualified and trained in adjusting ski bindings.
At the time of rental, PM Sci rental operators will make an assessment of your skill level and adjust the bindings to suit your needs. This way, you can ski safely and comfortably, reducing the risk of injury.
Correctly adjusting ski bindings is an important operation for the safety of the skier. If you are not sure how to adjust them, we recommend that you contact a professional. PM Sci rental in Folgarida is your guarantee of safety.